Sony Dvp-sr200p Multi Zone

. Considerations.

have written many articles and studies on the profitability of these facilities on roofs of industrial buildings and in buildings. I will not go to stating how interesting it is (it is) to install solar panels, nor the benefits that show (which do).

Increasingly, we are requested to act on decks on which to install solar panels, but unfortunately most of the time we are called to act on completed facilities, before serious damage and leaky roofs.

I take this space to expose a number of considerations to take into account before installing solar panels on our roofs, these considerations are addressed not only to companies that install solar panels, but also to owners of facilities where they will be installed.

1. Evaluation of the state of the housing
First, after selecting the supplier for the installation of solar panels on the roofs, you should make an assessment or study the current state of the housing, by a specialized company in metal roofing.

This study should indicate those defects or damage that exists in the metal cover on which to install the solar panels, dents, rust holes , leaks, ventilation, etc.

Thanks to this preliminary report, the installer will know the state of the deck on which to act. Once known, can be overcome (by the installer or owner), the extent of damage, in this way, should there be further damage, both parties would clearly delimited from have occurred from time as well as who is responsible.

2. Improvements and changes Preinstallation
Secondly, should consider what improvements or changes the owner want to cover before the installation of solar panels. This is highly recommended if you want to replace the existing translucent or install vent / chimney on the roof. Once installed

plates, the penalties for canceling some of them are very high, so it is advisable to improvements planned a priori.

Once the review has made the cover and have made appropriate changes, we can give approval for the installation of solar panels on the roof.

3. Occupational Hazard Prevention
is strongly recommended that before installation of solar panels and once you have distributed the location map of the same, to provide for the installation Lifelines of Approved. A fall protection system to protect workers who are to perform the installation of the plates and to protect those who for many years will maintain the same.

After installing the cover solar and before delivery thereof, should conduct a final review of the metal cover on which is installed and water testing prior to launch, if that were in need of repair.

Finally I would like to emphasize the un-installation solar panels on cement (corrugated) , although this is "bent" by a metal cover. It is expected that European regulations requiring the removal of asbestos cement, so it should be dismantled - if it is installed, the solar panels. Manolo


Luján
Closings Palomares Palomares